SLEDGE RTR 6S 4WD Electric Monster Truck w/VXL-6s ESC & TQi 2.4GHz Radio 95076-4

SLEDGE RTR 6S 4WD Electric Monster Truck w/VXL-6s ESC & TQi 2.4GHz Radio 95076-4

$879.95 $799.95
This item is out of stock


This is Traxxas 1/8 Sledge 4WD RTR Brushless Monster Truck Green Version w/ TSM TQi 2.4GHz Radio VXL-6S Power System. Engineered. Tested. Built to a higher standard. The all-new Sledge is made to exceed your expectations for quality, toughness, and fun. The rock-solid chassis, massive steel drivetrain, ferocious 6s power, and race-inspired handling leave everything else in the dust.

Features:

VXL-6s Waterproof Electronic Speed Control

  • 6s LiPo compatible

  • Integrated cooling fan

  • Real-time telemetry via Traxxas Link™

  • 3-LED status indicators

  • Powered accessory ports

  • 10-gauge silicone wire

  • Patented Traxxas High-Current Connectors


Velineon® 2000kV Brushless Motor

  • 4-pole 2000kV brushless motor

  • 5mm output shaft

  • Finned can for better heat dissipation

  • Aluminum motor cradle mount

  • Supports entire motor

  • Reduces flex for longer gear life


Up to 70+ mph with Two 3s LiPo Batteries

Traxxas Stability Management® (TSM)

  • Improves straight line acceleration and braking on low-traction surfaces

  • Never dulls throttle or slows the truck

  • Adjusts from off to 100% assistance from the transmitter


TQi™ 2.4GHz High Output Radio System

  • TQi™ 2-channel transmitter

  • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models

  • Programmable multi-function knob

  • Adjustable steering and throttle percentage (dual rates)

  • Adjustable steering and throttle sensitivity (exponential)

  • Adjustable steering and throttle end points

  • High 13ms frame rate and near-zero latency for responsive control

  • 5-channel micro receiver (#6533) with fail-safe security

  • Patented waterproof receiver box with easy-access plug


Drivetrain

  • Heavy-duty steel driveshafts

  • Large 8mm steel stub axles

  • Steel dogbone center driveline

  • Protective rubber boots on differential inputs


Transmission

  • Mod-1 pinion and spur gears

  • Fixed gear mesh system

  • Torque-Biasing Center Drive


Differentials

  • Heavy-duty sealed 4-gear design

  • Large scale steel ring and pinion gears

  • Oversize 8mm output shafts

  • Steel drive cups

  • Easy-access bulkheads


Oil-filled GT-Maxx® Shocks

  • Longer rear shocks for more travel

  • Machined aluminum threaded body

  • Extra-large bore and capacity

  • Large-diameter damper shaft

  • Lower cartridge with dual X-rings

  • Height-adjustable spring retainer

  • Lower spring perches bolted on


Suspension

  • Performance-optimized geometry

  • Ultra-tough composite arms

  • Made from our strongest cold-weather material

  • Molded insert for clean look

  • Rear rock deflectors

  • Press-in hinge pins to reduce play

  • Oversize molded toe and camber links

  • Heavy-duty C-hubs

  • Stronger than conventional designs

  • Require no adjusments

  • Multiple mounting points for suspension tuning


Chassis

  • 3.2mm ribbed aluminum chassis

  • Formed edges for improved strength

  • Thick T-Bar™ for added rigidity

  • Stronger than round bars

  • High-strength buttressing on shock towers

  • Ultra-thick 5mm 6061-T6 aluminum shock towers

  • Rugged locking battery compartment with quick-release door

  • Low-CG design for improved handling

  • Interlocking components for tight tolerances

  • Tough front and rear bumpers double as skid plates

  • Hidden wire management for clean appearance


ProGraphix® Body

  • Clipless body mounting system

  • Rigid internal frame

  • Molded body reinforcements for tear-through protection

  • Protective roof skids

  • Rugged high-downforce rear wing


Wheels and Tires

  • Huge 6.7” Sledgehammer® all-terrain tires

  • TSM-rated construction resists ballooning

  • Tough 3.8” black wheels

  • Splined 17mm aluminum axle hubs


Steering

  • High-throw bellcrank steering design

  • Heavy-duty servo saver with aluminum posts

  • Metal servo horn

  • Powerful #2275 metal gear servo

  • 347 oz-in torque

  • Fully waterproof


Sealed Ball Bearings

Hex hardware with Rust-Resistant Black Oxide Coating


Specifications:

Length (including wing): 23.78 inches (604mm)

Front Track: 18.10 inches (459mm)

Rear Track: 18.10 inches (459mm)

Ground Clearance: 1.95 inches (50mm)

Weight (no battery): 12.74 pounds (5.77kgs)

Height (overall): 8.43 inches (214mm)

Wheelbase: 15.10 inches (384mm)

Shock Length (front): 5.12 inches (128mm)

Shock Length (rear): 5.67 inches (144mm)

Tire Diameter: 6.7 x 3.3 inches (170mm x 84mm)

Wheel Diameter: 3.8 inches (97mm)

Speed Control: Velineon® VXL-6s (#3485)

Motor (electric): Velineon® 2000kV Brushless

Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear)

Differential Type: Sealed, hardened steel bevel, limited slip

Gear Pitch: Module 1.0

Chassis Structure/Material: 3.2mm aluminum plate

Brake Type: Electronic

Drive System: Shaft-driven 4WD

Steering: Double-shear bellcrank w/metal servo arm

Wheels & Tires: 3.8” wheels, pre-glued Sledgehammer® Tires & foam inserts 6.7x3.8

Radio System: 2-Channel, TQi™ 2.4GHz Transmitter with TSM® receiver

Servo: 2275 Waterproof, metal-gear (347oz-in torque)

Top Speed: 70+ MPH with two 3S LiPo batteries and optional gearing (sold separately)

Skill Level: 4

Battery Tray: Narrow configuration (L/W/H): 181mm x 50mm x 29/37/45mm, Wide configuration (L/W/H): 160mm x 57mm x 29/37/45mm

Includes:

  • Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motor

  • VXL-6s waterproof electronic speed control with integrated telemetry

  • Quick Start Guide

  • TQi™ 2.4GHz radio system

  • High quality maintenance tools

  • Jumper plug (for 4s battery use)

Requires:

  • LiPo Batteries

  • LiPo Balance Charger with iD™

  • AA Alkaline Batteries (4 pcs)